JAKIM-Certified · Updated May 2026
Halal Supplement OEM Malaysia — JAKIM-Certified Manufacturer Since 2018
Bionutricia is a JAKIM facility-level halal-certified nutraceutical contract manufacturer in Selangor, Malaysia. Patent-pending liposomal encapsulation, 6 international certifications, MOQ from 1,000 units, 239+ brand partners exporting to 30+ countries.
The Short Answer
Bionutricia Holding Sdn Bhd is a Malaysian halal supplement OEM that has held JAKIM facility-level halal certification since 2018, with continuous renewals and no major findings. Our certification stack covers FSSC 22000 (SGS-audited), GMP, HACCP, US FDA, MeSTI, , and the patent-pending Herbosomal® (PI2023005773) liposomal encapsulation technology verified by NanoVerify. We manufacture six dosage formats — powder sachets, liquid sachets, gel sachets, pouch beverages, chewable tablets, and liquid bottles — with MOQ from 1,000 units. We export to 30+ countries through 239+ brand partners and have been operating since 2006.
2018
JAKIM Halal Since
6
Certifications
239+
Brand Partners
30+
Countries Shipped
1,000
Min. Order Qty
20+
Years OEM
Get a halal supplement OEM quotation
Tell us about your product and target market. Our B2B team replies within 24 business hours, Monday–Friday (GMT+8).
- JAKIM-certified facility since 2018 · FSSC 22000 · US FDA
- MOQ from 1,000 units
- Powder sachets, liquid sachets, pouch beverages, chewable tablets, liquid bottles
- 239+ brand partners across 30+ countries
Request a wholesale quote
Brand owners, distributors and formulators only. MOQ 1,000 units.
Why brand owners choose Bionutricia
What makes a halal supplement OEM in Malaysia trustworthy?
The four signals every B2B buyer should look for — and what to ask in your RFQ.
1. JAKIM facility-level halal certification
Not product-level, not third-party “halal recognised” — the manufacturer holds JAKIM facility-level cert verifiable at jakim.gov.my. Bionutricia has held this since 2018 with annual surveillance audits, all passed without major findings.
2. Internationally-recognised food-safety stack
JAKIM halal is necessary but not sufficient. The OEM should also hold FSSC 22000 (SGS-audited) for export to the EU and US, US FDA registration, HACCP, GMP, MeSTI, and if you serve JAKIM halal markets.
3. Patented or proprietary technology
Differentiation matters at retail. Our patent-pending Herbosomal® (PI2023005773) liposomal encapsulation technology, verified by NanoVerify, produces measurably higher bioavailability for Vitamin C, glutathione, curcumin, and polyphenols — defensible premium positioning.
4. Transparent MOQ and supply-chain traceability
From 1,000 units MOQ. Bill-of-materials disclosure, supplier halal-cert chain on every ingredient, batch-level certificate of analysis at SGS or SAMM-accredited labs.
Certifications
Our halal & food-safety certification stack
Manufacturing formats
What dosage forms can a halal supplement OEM in Malaysia produce?
Six core formats. our halal export channel is built around sachet, pouch, chewable, and bottle formats which dominate the GCC and ASEAN halal markets.
Powder Sachets
MOQ: 1,500 sachets · Lead time 6 weeks
Vitamin-C boost, electrolyte, protein, collagen powder, fibre, greens.
Liquid Sachets
MOQ: 1,500 sachets · Lead time 7 weeks
Honey-based botanicals, vitamin shots, immunity boosters, beauty drinks.
Gel Sachets
MOQ: 1,500 sachets · Lead time 7 weeks
Energy gels, performance gels, premium-positioned single-serve formats.
Pouch Beverages
MOQ: 1,000 pouches · Lead time 8 weeks
Ready-to-drink halal beverages, functional drinks, wellness shots in stand-up pouches.
Chewable Tablets
MOQ: 1,500 bottles/sachets · Lead time 7 weeks
Kids’ vitamins, calcium chews, probiotics, halal-friendly fun formats.
Liquid Bottles
MOQ: 1,000 bottles · Lead time 8 weeks
20–30 ml shot formats, larger functional beverages, syrup-style supplements.
Vendor selection
How does Bionutricia compare to a typical Malaysian halal OEM?
| Criterion | Bionutricia | Typical Malaysian OEM |
|---|---|---|
| JAKIM halal cert | Facility-level since 2018 | Often product-level only |
| FSSC 22000 (SGS-audited) | Yes | Rarely |
| US FDA registered | Yes | Mixed |
| Proprietary technology | Herbosomal liposomal IP | Generic processes |
| MOQ | From 1,000 units | Often 5,000+ |
| Brand partners | 239+ globally | Variable |
| Export reach | 30+ countries | Usually 5–10 |
| R&D partnership | FRIM (Malaysian Forest Research) | None disclosed |
| RFQ reply | Fast, within hours | Days to weeks |
For a wider comparison, see our Top 7 nutraceutical OEM manufacturers in Malaysia (2026) guide.
How it works
What is the process to OEM a halal supplement in Malaysia?
Five steps from initial brief to finished goods leaving Port Klang. Typical total: 12–16 weeks for a first SKU.
Step 1 — RFQ & brief (1–2 weeks)
You submit the brief: target market, dosage form, key actives, MOQ, target retail price, label compliance country (SFDA, MOHAP, NPRA, etc). We respond with feasibility + indicative pricing within hours.
Step 2 — Formula development (2–4 weeks)
Our R&D team formulates and prepares the prototype. Halal-status verification on every ingredient. Stability planning. Bill of materials.
Step 3 — JAKIM variant approval (1 week)
Because our facility is JAKIM-certified, your SKU only needs a variant approval, not a fresh facility audit — typically 4–8 weeks vs the 4–6 months a new factory would face.
Step 4 — Trial batch & stability (4 weeks)
Small-scale trial batch produced, stability-tested. SGS or SAMM-accredited lab CoA. You approve the trial before mass production.
Step 5 — Mass production & ship (4–6 weeks)
Mass production, QC, halal documentation pack assembled. FOB Port Klang. Direct sailings to Jebel Ali (8–10 days transit), Dammam, Doha, Jakarta, Singapore, Hong Kong, US west coast, Rotterdam.
Documentation pack we ship with every consignment
JAKIM halal certificate, batch CoA, animal-origin declaration, alcohol-free statement, MITI free-sale certificate, certificate of origin, country health registration support, stability data, product spec sheet.
FAQ
Frequently asked questions about halal supplement OEM in Malaysia
Is JAKIM halal certification accepted in the GCC and UAE?
Yes. SFDA (Saudi Arabia) and the GCC Accreditation Center recognise JAKIM as a top-tier halal authority under GSO mutual-recognition. JAKIM-certified Malaysian supplements clear customs at Jebel Ali and Dammam in hours, not weeks. Read the full GCC recognition guide.
What is the MOQ for a halal supplement OEM in Malaysia?
For Bionutricia: 1,500 sachets for powder/liquid/gel sachets; 1,000 pouches for pouch beverages; 1,500 bottles or sachets for chewable tablets; 1,000 bottles for liquid bottles. Many Malaysian OEMs require 5,000+; we keep our MOQ deliberately low so emerging brands can launch.
How long does it take to manufacture a private-label halal supplement?
Typical end-to-end timeline for a new SKU: 12–16 weeks from approved formula to finished goods leaving Port Klang. Existing SKUs re-orders: 6–8 weeks. See the cost & timing breakdown.
What is liposomal encapsulation and why does it matter?
Liposomal encapsulation wraps a water-soluble active inside a phospholipid bilayer vesicle (50–250 nm), protecting it from stomach acid and improving absorption 2–8× depending on the molecule. Bionutricia’s patent-pending Herbosomal technology is NanoVerify-tested. Read the full liposomal explainer.
What does it cost to manufacture a halal supplement in Malaysia?
Where is Bionutricia’s facility located?
Taman Perindustrian Sungai Buloh, Kota Damansara, Selangor, Malaysia — 30 minutes from Kuala Lumpur city centre, 40 minutes from KLIA airport, and a direct trunk-road route to Port Klang for ocean export.
How many brand partners does Bionutricia work with?
239+ active brand partners as of 2026, across ASEAN, MENA, US, EU, and AU. References available on request.
What is the validity of a JAKIM halal certificate?
Typically 2 years, with annual surveillance audits. Bionutricia has passed every surveillance audit without major findings since 2018.
Can I visit the Bionutricia facility before placing an order?
Yes. Facility visits are welcomed and recommended for brand owners committing to multi-year contracts. Schedule via WhatsApp +60 16-661 8510 or business@bionutricia.com.
Knowledge Base
Industry guides & resources
The Complete Guide to Halal Supplement OEM in Malaysia (2026)
Certification, capacity, and choosing the right manufacturer — the definitive 2026 guide.
Is JAKIM Halal Certification Recognised in the GCC and UAE?
How JAKIM halal certification opens GCC and UAE market access for supplement brands.
How Much Does It Cost to Manufacture a Private-Label Supplement?
Cost drivers — formula, dosage format, volume, packaging and certification.
What Is Liposomal Encapsulation?
How liposomal delivery works and why it matters for premium supplement positioning.
How Long Does a JAKIM Halal Audit Take?
Full timeline and document checklist for JAKIM halal audit at a supplement OEM.
Top 7 Nutraceutical OEM Manufacturers in Malaysia (2026)
How Bionutricia compares to other Malaysian nutraceutical OEM manufacturers.
Ready to launch a JAKIM-certified halal supplement?
JAKIM facility-level halal since 2018. FSSC 22000 (SGS-audited). Patent-pending liposomal tech. MOQ from 1,000 units. Fast RFQ reply.
Email: business@bionutricia.com
Who you are working with
The people behind the patent
Bionutricia is led by food technologists, mechanical engineers and PhD scientists, operating from one connected facility in Kota Damansara since 2006.
Leadership
Ts. Ng Kuak Ping, FIFST
Executive Manager & Founder. Professional Technologist and Food Analyst. B.Sc (Hons) Food Science & Nutrition. Fellow IFST (UK). Prof. Tech PT23070081. Food Analyst MJMM001421.
Pong Kok Wei
Co-Founder & COO. B.Sc (Hons) Mechanical Engineering. Leads facility operations, equipment scaling and the pilot-to-commercial extraction line.
Kong Siew Mee
Co-Founder & GM. B.A. Business Management. Leads commercial, partner relationships and day-to-day commercial running.
Senior staff
Dr. Yong Yi Yi
Operation Manager. PhD in Science (Monash University) — Food Science & Technology, Microbiology & Chemistry. BSc (Hons) Medical Bioscience.
Noor Azirah Binti Segu Jalaludeen
Quality Assurance & Halal. B.Sc (Hons) Chemical Engineering Technology in Food. Owns halal audit readiness and batch quality release.
Vitthia Rama Murti
Lab Pharmacist. B.Sc (Hons) Pharmacy (UOC). Owns formulation chemistry and stability testing.
Jojo Pang
Nutrition Business Specialist. B.Sc (Hons) Food Science. Bridges brand-owner briefs to commercial production runs.
Nur Ayunis Binti Che Daud
Nutritionist. BSc (Hons) Nutrition (USM). Reviews formulations for nutritional integrity.
Cindy Chua Shiu Sinn
Dietitian. Bachelor of Nutrition and Dietetics (Flinders, Australia). Diploma in Chinese Medicine and Acupuncture.
Inside the factory
Pilot and commercial scale under one roof
GMP and HACCP-certified manufacturing, with pilot-scale trial runs and commercial production on the same site — so a formula that works at trial scales without being re-developed.
Recognition
Awarded by government, industry and trade
External validation matters when a brand owner is deciding who to trust with their formula.
MDEC Top Seller Award
Malaysia Digital Economy Corporation, 2019.
SOBA Outstanding Business
Star Outstanding Business Awards, The Star, 2019.
SCBEA
Sin Chew Business Excellence Award.
MiFT Award
Malaysian Institute of Food Technology.
NanoVerify
Verified nano-technology process.
FMM and MPDF
Federation of Malaysian Manufacturers member, and Malaysian Pharmaceutical and Dietary Supplement industry participation.
Liposomal supplement OEM
Premium bioavailability positioning
Bionutricia is a liposomal supplement OEM, offering patent-pending Herbosomal® encapsulation technology for brands seeking premium bioavailability positioning. Encapsulation feasibility for your formula is discussed with our R&D team as part of your RFQ.
Bulk ingredient supply
Botanical extract manufacturing
Standardized botanical extracts in bulk, for formulators and finished-product manufacturers who need a documented ingredient rather than a finished SKU.
Powder formats
Spray-dried extract powders with defined particle size and free-flowing handling characteristics for dry blending.
Standardisation
Marker compound levels and heavy-metal limits confirmed on every batch Certificate of Analysis, so incoming QC has the figures it needs.
Documentation
Every lot ships with a batch Certificate of Analysis and origin documentation, supporting regulatory filing and procurement checks.